15 07 2008

Read about this Desktop blog management s/w in another blog and tried. Its quite handy and featurerich.



22 05 2008


300px-Keplers_supernovaNow thats some news … Sure we live in intersting times.

More on SuperNova at Wikipedia.

WiFi over 100km

22 05 2008

Read this blog on Intel’s Rural connectivity Project (RCP) initiated project to extend WiFi range. With MAC enhancements (and possibly radio and other software enhancements), Intel seem to have achieved 100km access range over WiFi… Now thats very comparable to WiMAX’s promissed 30km range.

Now this is still requires LOS (Line of Sight) and this possibly was tested on a terrain that was flat enough to achieve it. Depite that I think this is a breakthru.

Does this mean this will give WiMAX its run for the money? I don’t think so. Atleast not in the short run. WiMAX has gained enough traction of its own. Also Iam not sure about the path to standardization and availability of this WiFi extension into the market.

But given the overall price advantage of WiFi access points, this would be a great boon for last mile solution in rural areas and for MAN.

Testing BlogJet

22 05 2008

I have installed an interesting application – BlogJet. It’s a cool Windows client for my blog tool (as well as for other tools). Get your copy here: http://blogjet.com

And oh, btw this also helps in bypassing the proxy over http. Iam not how this works since this client also has to go thru the same http proxy, but when connecting via BlogJet, Iam able to post messages (as evident from this post 🙂

Putting the Sansa into Recovery Mode

25 03 2008
While updating mp3 tags with Linux (mp3info), I think I disconnected the device prematurely and it screwed the mp3 ID3 tags and possibly the file system. The player keeps rebooting while refreshing database.
While googling around found this useful (but unsafe) tip.
From time to time there may be a reason to put your Sansa into Recovery Mode. This is one of the four USB modes that the Sansa has, which is used for fixing most problems with the Sansa.
SANSA Sandisk
  • Turn the hold switch so that the orange is showing.
  • Hold the REC button on the side of the Sansa.
  • While holding the REC button, press the power button.
  • After the SanDisk logo appears, it should say “Welcome to Recovery Mode”.
  • After this appears, you may release the REC button. If the Sansa goes to the firmware, it is most likely because the REC button wasn’t held in far enough, and you must repeat these steps.

File Descriptions

  • Firmware file
    • Often called PP5022.MI4, this is the file that controls most of the Sansa, with the exception of when it turns on.
    • When using the Hebrew firmware, this file must be (re)named to firmware.mi4, which is case sensitive.
    • The latest firmware may be downloaded from the Manual Firmware Download thread
  • Bootloader File
    • Often called BL_SD_BOARDSUPPORTSD.ROM, this is the file that tells the Sansa to load the firmware file. The bootloader file also contains the Recovery Mode.
    • When using the Hebrew firmware, this file must be (re)named to pribootLoader.rom, which is also case sensitive.
    • The bootloader almost never needs to be replaced, and a bad or corrupt bootloader may result in the need to use e200tool, a very low level tool.
  • sansa.fmt
    • This file, though normally not used, can be placed on the Recovery Mode drive to format the main partition, which stores all of the music.
    • This file is often used to fix most problems that aren’t fixed by replacing the firmware, such as a music file that is corrupt, which occasionally causes the Refresh Database ‘window’ to freeze.
    • This file’s extension must be fmt. The full filename can not be sansa.fmt.txt or similar, and must only be sansa.fmt
  • Other files
    • Unless it is noted in the Manual Firmware Download thread that another file must be included for the firmware to work, do not add any other files to the Recovery Mode drive
    • Do not, under any circumstances, place a file ending in ‘.bin’ on the Recovery Mode drive.
    • If in doubt about placing any other files besides the firmware (and possibly bootloader) onto the Recovery Mode drive, PM a Sansa moderator, who should be able to help you.

“Load main image failed, switch to recovery mode” error
This error, the most common reason for using Recovery Mode, happens when the firmware is corrupt. Corrupt firmware can not harm your Sansa. In addition, it is fairly easy to fix:

  • Download a copy of the latest firmware, such as from theManual Firmware Download thread.
  • With the Sansa in Recovery Mode, save the mi4 file to the 16MB-FORMAT drive. Rename the mi4 file to PP5022.mi4, if it is not already.
  • Do not copy any other files over. The 16MB-FORMAT is not for storing music and other files. The only files that can be copied over are the bootloader, firmware, and sansa.fmt files
  • If you are using the Hebrew firmware, you may need to rename the firmware file to firmware.mi4 (case sensitive).
  • Disconnect your Sansa.

Sansa Freezes on Database Refresh
This problem is also fairly common, and usually occurs when an MP3 file is corrupt, and causes the database refresh to freeze. It also is fairly easy to fix:

  • Turn off your Sansa, if you haven’t already. If needed, hold the power button for 20 seconds to force it off.
  • Place your Sansa in recovery mode by following the steps above.
  • Place the sansa.fmt file in Recovery Mode. Please note placing this file in Recovery Mode will format your Sansa. That means it will delete all your music that is stored on it.
  • Remove your Sansa, and wait for it to format.
  • Turn off hold, restart Sansa (if needed) and
  • Done

Latest Sansa e200 firmware: http://chrisjs.com/downloads/PP5022.mi4My (Sansa) Rockbox Build:
Site | Download | Old Builds | Thread
My PM box fills up too fast it seems – feel free to email me if you have any questions.

Resizing disk in Vista

6 01 2008

Control Panel->Computer Managament->Storege->Disk Management

Select the drive, right click and select Shrink/Expand Volume

 If Vista would n’t allow you to shrink C:, disable Snapshot (restore points).

Control Panel->System->System Protection

Uncheck C: and Apply

To resize/move Page file

Control Panel > System > Advanced system settings > Advanced tab | Performance Settings > Advanced tab | Virtual Memory Change > UNCHECK “Automatically manage paging file size for all drivers

Select the drive where you would like the new page file to go and either fill in “Custom Size” or “System managed size” and click on “Set”.


Select the drive where the present page file is (ie. C drive) and select “No paging file size” and click on “Set”.


ps. The quickest way to bring up the Advanced System Properties tab is
{Windows Key} > type “systempropertiesadvanced”

MediaMonkey tricks

9 11 2007

If you have not heard of , its a little media player/organized based on WinAmp I like and use. Here are some plugins that can make it more useful.


  • Download MagicNodes from here
  • Rename it to MagicNodes.1.3b.vbs and move it to Program Files\Media Monkey\Scripts\Auto (create Auto if required)
  • You will need Mswinsck.ocx. Download from here if you want to get it without having to validate your Windows from Microsoft.
    • Copy msscript.ocx to Windows\system or WinNT\system32.
    • Register msscript.ocx using RegSvr32.exe. Example:
    • Regsvr32.exe c:\windows\system\msscript.ocx
  • Add a Node with Edit->Create New Magic Node. Enter Ragam\<Ragam>\<Artist>\<Album> to create a node grouped by Ragam, Artist, Album (I had Custom1 and Custom2 renamed as Ragam and Talam in Options->Apperance). This (Ragam) node should appear under Magic Nodes
  • Refer this tutorial for advanced usage.

Remote Control and Web Interface:

  • Download the plugin from here.
  • This will install the plugin under WinAmp. While installing select Program Files\MediaMonkey\Pugin instead to copy them to MediaMonkey.
  • Once installed, restart MediaMonkey and configure plugin under OPtions->GPlayer->General Plug-ins-> WinAmp Web Interface
  • In particular, change the port from default 80 to something else, Remove user anon and add another user with password.
  • Access the media collection and WinAmp/MM control at http://localhost:port